10
4.
Software Control Program
The TWP-10 comes with a software control program which runs under Microsoft Windows
98, 2000, XP, 7, 8. Simply click the program icon after it is installed on your operating
system. However, before you start your software control program, please make sure you
have secured the connection between the PC and the TWP-10. The sections below will take
you through the system connection setup step by step.
Note: Under Microsoft Windows 7, please run as an administrator.
4.1 Start the Software Control Program
The following dialog window will pop up upon execution of the software control program.
There are basically two ways to connect the TWP-10. You can either connect via the USB
virtual COM port or the Ethernet port.
•
USB: Select the appropriate
virtual COM
port
and click the
OK
button.
•
Ethernet: Enter the TWP-10 device
IP
address
and click the
OK
button.
After the software control program is loaded, you will see the control interface as shown
below.