THROUGH THE LENS KIT FOR TLM-700 TTL-100
10
Camera Exposure and the 60/40 Glass
After setting up the camera with the 60/40 glass in front of the lens adjust the camera set up and white balance. This is
because the 60/40 Glass affects the camera exposure by approximately 1 stop almost like the effect of a neutral density
filter. Consult your camera manual for further help and advice with its exposure and white balance settings.
TLM-700 Monitor Setup
To use the TLM-700 with the TTL-100 we must enable the monitors flip function, this will ensure the images
from the HDMI source are correctly displayed via the mirror glass:
1.
Press the ‘Menu’ button to open the on-screen display
2. Navigate to the bottom menu section with the cog icon by pressing the > button
3.
Press the ‘Menu’ button to select this option
4.
Navigate to the ‘Image Flip’ option
5.
Press ‘Menu’ to select this option
6.
Press > to set the flip function to ‘V’ (vertical flip)
7.
Use the ‘Exit’ button to close the on-screen display
You may also want to disable the Histogram feature to remove the on-screen histogram:
1.
Press the ‘Menu’ button to open the on-screen display
2. Navigate to the fourth menu section with the graph icon by pressing the > button
3.
Press the ‘Menu’ button to select this option
4. Navigate
to the ‘Histogram option
5.
Press ‘Menu’ to select this option
6.
Press > to set the function to ‘Off’
7.
Use the ‘Exit’ button to close the on-screen display
Please consult the TLM-700 user manual for more information.
