Datavideo SE-4000, Instruction Manual

Page: 49 / 128

49
The following sub-sections will show you various options available in the menu.
5.1 Start
The Start menu allows the user to set the transition time, the transition type as well as
various wipe effects. The menu options are described below.
Transition
The Transition option allows the user to set the transition duration, in frames, for switching
the PGM view when using the MIX, DSK AUTO and FTB buttons.
For example, if the M/E is set to a value of 50, then the transition will take effect over a period
of 50 frames or roughly 2 seconds. When the AUTO button is pressed, the transition will take
the current M/E value defined by the user setting.
Type
The SE-4000 provides four major types of transition effect, which are Clip (Stinger), WIPE (2D)
and Mix. Please note in addition to selecting the transition effect in the menu, you can also
press MIX, WIPE or STINGER button to enable the respective transition effects.
Note: The Stinger transition is currently under development so the function cannot be used.