6
Product Overview
The main design purpose of the RMC-230 is to replace camera iris and shutter control
on MCU-100S and MCU-200S which are cost effective remote controllers designed
specifically for remote control of SONY video cameras and camcorders. The RMC-230
acts as an interface connected between an MCU unit and the cameras. One end of
the RMC-230 is connected to the camera via AD-1S and another end of the RMC-230
is connected to the MCU unit.
In addition, the RMC-230 can also be used as a standalone device solely for
controlling the camera iris and shutter as shown in the diagram below.
That’s Datavideo, sharing the value!
RMC-230
AD-1S
SONY 8PIN
RJ-45
RJ-45
