12
Power Cascade Multiple RMC-230 Units
1.
Use a Cat. 5e cable to connect one of the RJ-45 ports on the MCU-100S/200S to
the RMC-230’s MCU port.
2.
Connect the RMC-230’s AD-1 port to the AD-1 via a Cat. 5e cable.
3.
To power cascade multiple RMC-230 units, the DC power adapter must be
connected to the first RMC-230 unit (DC IN 12V Socket). If the user has to
connect the second or the third unit, the user can use the DC power cable to
cascade the second unit by connecting another power socket (PWR Cascade) to
the DC IN 12V socket of the second unit. The user is also allowed to connect
each RMC-230 unit to the DC power independently.
Note: Power adapter on the RMC-230 is optional if the RMC-230 is connected to the
MCU-100S/200S. The MCU-100/200 powers the RMC-230 via Ethernet connection.
