Datavideo NVS-34, Instruction Manual

Page: 49 / 64

49
3.4 Stream and Record Buttons
The INPUT, RECORD , STREAM , VERTICAL and BITRATE buttons on the front panel
give the user certain controls of the record and stream functions. In this section, we
will cover operations of these four buttons in detail.
Input Button
Press the INPUT button to select between SDI and HDMI input sources. The button is
always in solid white.
The activated input source will be indicated by the LEDs above the button.

Green : Input source activated

Off : Input source deactivated
Note: The Input button is disabled while streaming or recording is in progress.
Record Button
Press the RECORD button to start/stop recording.
The table below summarizes the RECORD Button LED behaviors:
RECORD Button
Solid White Record function in idle state
Blinking Red Record function is activating or resetting
Solid Red Record function activated
Start recording

When idle, the RECORD button is solid white.

Press and hold the RECORD button for approximately 2 seconds.