Network Video Decoder
NVD-35 MARK II
23
Settings > STB Mode
The STB mode can only be used along with a Datavideo DVS-200 stream
server or dv Cloud please visit
for more
information on the DVS-200 and
on dv Cloud.
When enabled, the NVD-35 MARK II will connect to the DVS-200 or dv Cloud
server and download a list of available live and VOD channels, these channels
will be displayed on the SDI output. Channels can be selected using the
supplied IR remote control.
When used with DVS-200 only HLS streams will be decoded so low latency is
not possible in this mode, when used with dv Cloud SRT streams will also be
available if low latency is required.
STB Mode
When enabled,
the ‘Live stream setup’ options will be disabled, the NVD-35
MARK II will display a channel list on the SDI output and control is only using
the
Please Note
: STB Mode is intended for use with SDI output only.
Hostname:
Enter the DVS-200 machines IP
Username:
Enter the DVS-200 user accounts you wish to download channels
from, you will only see channels this user account has access to.
