Datavideo KMU-100, Instruction Manual

Page: 47 / 88

47
FN12 KMU-100 Temp
FPGA Temperature
PCB Board Temperature
FN13 Firmware Ver. RMC-185 Firmware Version
FN1. Exits the MENU (EXIT)
Exits the setup menu mode.
FN2. Input A Source Assignment (Input A Source)
In this option, you may select a source for input A image processing. The available interfaces
are:

1xSDI – SDI video interface up to 12G (SD is not supported)

4xSDI – quad SDI video

HDMI – HDMI 2.0

Clone – Input B as a source
FN3. Input B Source Assignment (Input B Source)
In this option, you may select a source for input B image processing. The available interfaces
are:

1xSDI – SDI video interface up to 12G (SD is not supported)

4xSDI – quad SDI video

HDMI – HDMI 2.0

Clone – Input A as a source
FN4. Output Format Selection (Output Format)
There are many video output formats available for selection. The available video output
formats are listed as follows:

PAL

NTSC

PAL 16:9

NTSC 16:9

720p50

720p59.94

720p60

1080p25

1080p29.97

1080p30

1080i50

1080i59.94

1080i60

1080p50

1080p59.94

1080p60