Datavideo iCast 10NDI, Instruction Manual

Page: 71 / 96

71
Volume
Use the audio sliders to adjust audio volumes of the input video channels as well as the external
audio inputs.
You can set the audio standard for XLR and LINE-IN external audio inputs. First click the Standard
button to open a drop-down menu then select SMPTE or EBU.
There is an extra Stereo/Mono button for LINE-IN external audio input. When switched to mono,
iCast 10NDI will automatically synchronize the left audio channel to the right.
You can assign an audio channel from four input video channels to the IP stream. Click the Set
button and select from the list that opens.
Delay
Clicking the Delay button will open up a keypad shown below which allows you to enter the delay for
the respective audio channels.