Datavideo HS-2850, Instruction Manual, Page: 54 / 84

54
3.8 Multiview Upload Tabs (A / B / C)
These three tabs are used to write new Multiscreen layouts to the switcher in order to
change the HDMI multi-view layouts as described in the
HDMI Multi-View section.
The user can change Multiview layout. Simply clicking the “ LOAD ” button to browse for a
Multiview files (file extension *.mss) stored on the computer. This file is then loaded into
the application window. The
WRITE button can be used to set the new Multiview layout.
NOTE: Only change these layouts with guidance from your local Datavideo office as
attempting to edit or load your own layouts may result in a poor outcome or a non-
responsive switcher.