38
Use the network
PING
feature to check if the IP change is successful. You will get the
PING
reply from the switcher if the IP is valid and the connection has been successfully
established.
3.3 Switcher tab
This first tab can be used to choose the method of connection between the computer and
the switcher. In this case the HS-2850 is connected using selected Ethernet IP addresses.
Note that the first three numbers in the IP addresses of the switcher and computer should
be the same. The last number in each IP address should be unique.
If you are connecting for the first time you may be asked by the computer to change the
firewall setting to allow this application to connect to the switcher.