Datavideo HS-1600T, Instruction Manual

Page: 38 / 96

38
Chapter 5 Applications
5.1 Placing a logo on the video using the lumakey function
The HS-1600T allows the user to place a logo on the video using the lumakey function. First of all,
create a 1920x1080 (16:9) logo against a black or white background on a laptop. Once the logo is
created, please follow the steps outlined as follows to insert the logo layer.
Note: If your logo consists primarily of dark colors, choose a white background; if the logo consists
primarily of bright colors, choose a black background.
1. Connect the laptop to the switcher’s HDMI Input Port .
2. Press the MENU button to open the OSD Menu on the four-quadrant Multiview display.
3. In the Lumakey menu, set the “ Lumakey Source ” to Input 4 .
4. In this example, the logo is against a black background so Black Mode is chosen.
5. Set the “ Cleanup Level ” to 10 if the background is in total black.
6. “ Transparency ” is set to 64 if an opaque logo is desired. Opaque logo can be created by setting
the “ Transparency ” to 64. Semi-transparency effect can be generated by setting the
“ Transparency ” to a value between 0 and 64.
7. Exit the menu after the Logo is properly configured.
8. Press the Luma Key PGM button to place the logo on the Program screen or the Luma Key PVW
button to place the logo on the Preview screen.
5.2 Connecting PTC-150T Cameras
DVIP is a communication interface that allows the user to control multiple PTC-150T cameras
remotely. Follow the steps outlined below to set up your PTC-150T cameras with the HS-1600T.
1. Locate the DIP switch at the bottom of the PTC-150T camera
2. Set DIP Switch positions 1 and 4 to ON
3. Power ON the PTC-150T PTZ Camera.
4. Open the main menu by pressing the MENU button on the HS-1600T’s keyboard panel and select
option 4 “ Remote Control ”.
[MAIN MENU]
1:
CAMERA SET (NORMAL)
2: MEMORY