Datavideo HS-1600T, Instruction Manual

Page: 29 / 96

29
will remain unchanged. The tally light color will only change (red

green) after the transition of PGM
and PVW views is complete.
3.6 User Mems
In “ User Mems ”, the user is allowed to load previously saved settings and save the currently
configured settings.
Main Sub-Menu Options or Values Default Value
User Mems Load Memory User 1-6
Load
Save Memory User 1-6
Save
Factory Default [Reset]
Load Memory
Use the up/down arrow to select the desired memory location and load the saved setting by selecting
“
Load ”.
Tip: The user can also press one of the USER memory shortcut buttons (1-3) on the control panel as a
quick way of loading those previously saved User configurations. Use the SHIFT button to switch
between USER MEMORY 1-3 and USER MEMORY 4-6 .
Save Memory
Use the up/down arrow to select the desired memory location and save the current setting by
selecting “
Save ”.
Factory Default
Reset : Once selected, the factory default settings will be restored. The device will start the factory
reset process in 2 to 3 seconds after “ Reset ” is selected.
3.7 Setup
In the “Setup” menu, the user can change the output resolution , reset the HS-1600T to its Factory
Default values, choose the preferred OSD menu language , upgrade firmware and view the current
firmware versions (Mainboard and Keyboard).
Main Sub-Menu Options or Values Default Value
Setup PGM Out Res.
1080p/60
1080p/59.94
1080p/50
1080p/30
1080p/25
1080i/60
1080i/59.94
1080i/50
720p/60
720p/59.94
720p/50
576i
480i