Datavideo HDR-90 Instruction Manual Download Page 36 | Manualshive

Page: 36 / 44

Datavideo HDR-90 Instruction Manual Download Page 36

36

5.

Firmware Update

Datavideo  usually  releases  new  firmware  containing  new  features  or  reported  bug  fixes
from  time  to  time.  Customers  can  either  download  the  firmware  as  they  wish  or  contact
their local dealer or reseller for assistance.

This section outlines the firmware upgrade process which should take

approximately few

minutes to complete

.

The existing settings should persist through the

firmware upgrade process, which should

not be interrupted once started

as this could result in a non-responsive unit.

Firmware Upgrade Requirements



SSD



Latest firmware files

Upgrade Procedure

1.

Save the latest firmware files on the SSD.

2.

Install the SSD in a removable disk enclosure.

3.

Insert the drive enclosure into the recorder and move the locking latch from right to left
side to secure the drive enclosure in place.

4.

After turning on the HDR-90’s power, the firmware will be automatically updated.

5.

You should be able to see a progress bar displayed on the screen. Do not shut down the
recorder or remove the drive enclosure during the update process.

6.

You will be prompted to reboot the HDR-90 once the update is complete.

Note: If you are prompted that the firmware update fails, please reboot the HDR-90 to
restart the firmware update process.

«
...
34
35
36
37
38
...
»

Summary of Contents for HDR-90













































Reviews:

No comments