Datavideo HDR-90, Instruction Manual, Page: 30 / 44

30
Time Code
Various time code options are described as follows:

Rec Run
：
Time code runs during video recording.

Free Run
：
Time code runs automatically.

Embedded
：
Video embedded time code

External
：
Linear (or Longitudinal) Timecode (LTC)
4.3.2 Control
1. Tap to open Input
Setting page
2. Genlock is
currently not
available.
3. Tap to
enable/disable
DHCP mode
4. DVIP is currently
not available.
5. Tap to
enable/disable
local control
6. Tap to enable/disable
secure stop
Note: Once the secure stop is
enabled, you have to hold
down the Record button for 3
seconds to stop recording.
Timecode Trigger: Once
activated, the system will
automatically detect the
time code, and if detected,
the HDR unit will then start
recording.