Datavideo EPB-1340, Instruction Manual, Page: 77 / 87

77
7.1 Main Adjust
The first menu option is the MAIN ADJUST .
To access the MAIN ADJUST sub-menu, press enter and the Brightness sub-option will be highlighted.
To adjust BRIGHTNESS press Enter again. Use the Up / Down buttons to change the setting and then press
Enter to store the new value and return to the main menu.
Use the Up / Down buttons to select a different setting (Brightness, Contrast, Saturation, Sharpness, TINT
and etc). Follow the same procedure to set other values.
7.2 Color
Press the MENU button to access the menu and use the Up / Down buttons to move to the COLOR
option so that it is highlighted. Press the ENTER button to open the COLOR sub-menu.
To access the selected color setting, press
ENTER again.
Use the Up / Down buttons to navigate the available color settings.
You can choose:
7500
9300
6500
USER COLOR
7.3 Information
The System Information Menu displays Horizontal Frequency, Vertical Frequency, Resolution and the
monitor’s version of firmware.
Once selected, the information will be displayed as follows:
You will see:
H. FREQUENCY 33.7KHZ
V. FREQUENCY 60.0HZ
RESOLUTION 1920X1080I
VER. 0.11
7.4 Special Function
The Special Function Sub-Menu has settings for the OSD TIMEOUT , Frame Ratio , 4:3 MARK LINE , Central
Mark , and Cinema Zone Mark.
To access the selected setting press the
ENTER button.
Use the Up / Down buttons to navigate the available options.
You can choose: OSD TIMEOUT 5-120 SEC
FRAME RATIO 90 / 80 / 0FF
4:3 MARK LINE ON / OFF
CENTRAL MARK ON / OFF
CINEMA ZONE MARK ON / OFF