Datavideo EPB-1340, Instruction Manual, Page: 35 / 87

35
Position
The user can adjust the horizontal position of the P-in-P window by adjusting the X value.

Positive X value positions the P-in-P window to the right.

Negative X value positions the P-in-P window to the left.

Zero X value positions the P-in-P window at the center.
Border
P-in-P window border color can be set by adjusting the Luma , Saturation and Hue values. Luma and
Saturation range from 0-100%, whereas Hue ranges from 0-355. The “ Width ” sub-option adjusts the
border width. A width of zero (0) will turn the P-in-P window border off.
Crop
The P-in-P window crop can be adjusted by modifying the following parameters:

Left – Adjusts the position of the left edge of the P-in-P window.

Right – Adjusts the position of the right edge of the P-in-P window.

Size – Adjusts the P-in-P window crop size.

Top – Adjusts the position of the top edge of the P-in-P window.

Bot – Adjusts the position of the bottom edge of the P-in-P window.
P-in-P Lite
In this sub-option, the user is allowed to switch between FINE and NORMAL modes. In FINE mode, the
parameters X can be fined tuned with step size 0.1. In NORMAL mode, the parameters X is adjusted with
step size 1.
Inputs
This feature allows the user to configure the color of the Inputs 1-4. In addition, the user can shuffle the
contents of Inputs 1-6 without changing the hardware connections at the back of the machine. The user
can also select the input source from Clip, Still, Freeze and Live.
Advanced Mode
Inputs Input 1 Black 0% White 100% Chrom 1.0
Input 2 Black 0% White 100% Chrom 1.0
Input 3 Black 0% White 100% Chrom 1.0
Input 4 Black 0% White 100% Chrom 1.0
Freeze 1 Still 2 Live 3 Still
4 Still 5 Still 6 Live
Crosspoint 1 Input 1 2 Input 2 3 Input 3
4 Input 4 5 Input 5 6 Input 6
Basic Mode
Inputs Freeze 1 Still 2 Live 3 Still
4 Still 5 Still 6 Live
Crosspoint 1 Input 1 2 Input 2 3 Input 3
4 Input 4 5 Input 5 6 Input 6
Input 1-4
By selecting the corresponding input (Inputs 1-4), the user will then be allowed to configure the colour of
the inputs 1-4 by adjusting its Black Level, White Clip and Chroma Gain parameters.