12
3. How to set the SMPTE/EBU Standard for the
Audio Level
The DAC-8PA allows users to set the SMPTE/EUB standard of the audio output
signal from Audio OUT. Please follow following steps for further setting.
1. Please install the software “DAC-8PA FW TOOL.exe” in your PC. After the
installation is finished, please open the software.
2. Please use a USB cable to connect from your PC to the MINI USB interface
of the DAC-8PA.
3. Please connect the DAC-8PA to the power source.
4. Please press the “Read” key and then the software version will be shown.
5. Please press the SMPTE or EUB key to set your desired Audio Level standard.
Summary of Contents for DAC-8PA
Page 1: ...DAC 8PA...
Page 13: ...13 4 Dimensions All measurements in millimeters mm...
