Datavideo 4K ShowCast STUDIO, Instruction Manual

Page: 55 / 98

55

Check “Obtain an IP address automatically”.

Enter IPv4 settings:
-
IP Address: 192.168.1.2
-
Subnet Mask: 255.255.255.0 (System default is 255.255.255.0)
-
Default Gateway: Not required for point-to-point connection.

You should be able to access the NVS-31 MARK IV via its default IP address (192.168.1.200).
Advanced Troubleshooting
Try the following if you still are unable to connect:

Use the ARP table to search for NVS-31 MARK IV’s MAC address; the MAC address can be found on
the print label at the bottom of your device.

MAC address is 00:07:36:04:85:64.

On the command prompt (terminal on MAC OS), enter "arp -a" then press enter key to display an
ARP list. See if the NVS-31 MARK IV is successfully connected to the network.

Execute services.msc, and on the right column of the “Services” window, locate “DHCP Client”
then click “Restart”.

On the command prompt, enter ipconfig/flushdns followed by ipconfig/release or
ipconfig/renew.
6.2 Web User Interface
By now, we have obtained the IP address of the NVS-31 MARK IV. Enter the NVS-31 MARK IV’s IP address
into the address bar of a browser then hit the ENTER button. Login by entering the user name as well
as the password into a pop-up dialogue box as shown below.