5.3
Quick menu
1. Storage status of the camera memory.
2. Battery level.
3. Enable/disable Bluetooth or open the Bluetooth settings menu. See also section 12.2
4. Enable/disable Wi-Fi or open the Wi-Fi settings menu. See also section 12.1
5. Enable/disable automatic upload of images. See also section 11.5
.
Note
If the camera is not paired with a FLIR Ignite account, you will be prompted to
sign in to FLIR Ignite before you can enable automatic upload.
6. Turn on/off the camera lamp.
7. Adjust the brightness of the screen.
8. The FLIR Ignite user account that the camera is paired with. For more information,
see section 11.4
9. Storage status of the FLIR Ignite account.
5.3.1
Navigation
To display the Quick menu, swipe down from the top of the screen.
To navigate the Quick menu by using the touch screen, do the following:
• Tap to enable/disable a function.
•
Bluetooth
and
Wi-Fi
: Tap and hold to open the settings menu.
• Screen brightness: Tap the screen to adjust the screen brightness.
To navigate the Quick menu by using the navigation pad, do the following:
• Push the navigation pad up/down or left/right to highlight a function.
• Push the center of the navigation pad to enable/disable the highlighted function.
•
Bluetooth
and
Wi-Fi
: Push and hold the center of the navigation pad to open the set-
tings menu.
• Screen brightness: Push the navigation pad up/down to adjust the screen brightness.
To close the Quick menu, push the Back button.
#T810624; r. AB/92323/92323; en-US
9
