UM-0085-B09
DT80 Range User Manual
Page 164
RG
dEX User Roles
There are three user roles in
dEX
•
Data Supervisor
This role have a limited access only to
Monitor the Logger
menu which allow them to view logger status,
download or delete data. No programming function as they cannot access
Configure the Logger
menu or
sending a new program via Command Interface.
And since there is no access to
Customised dEX
menu, it is not possible to change the display inside
Monitor
the Logger
page including changing mimic page properties.
Figure 58:
dEX
home for Data Sipervisor
•
Configure Logger User
This role have expanded function to allow dataTaker programming by allowing access to
Configure the
Logger
. Furthermore they have ability to change
Monitor the Logger
display including mimic page properties
since Customised dEX is also accessible.
However this role is restricted for creating/ editing/ deleting users.
•
Administrator
This role is similar to
Configure Logger User
with an expanded function for creating/ editing/ deleting users.
Figure 59:
dEX
home for Config User and Administrator
When security is enabled, only one user allowed to access dataTaker. Other user will have to wait until dEX is no longer
in use (the previous user logged out). User right can be seen at the bottom right side of dEX screen.
Figure 60: dEX user right status
