52059357
© 2011 Greenlee Textron Inc.
5/11
Register this product at www.greenlee.com
Enregistrez votre produit en ligne, www.greenlee.com
Registre este producto en www.greenlee.com
INSTRUCTION MANUAL
MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUCCIONES
Description
The PA70081 HDMI
®
Cable Tester is designed to check
and troubleshoot the pin connections of HDMI
®
(high
definition multimedia interface) cables. It is ideal for
testing the continuity of each pin of an HDMI
®
cable
prior to installation on equipment.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This instruction manual is intended to familiarize all
personnel with the safe operation and maintenance
procedures for the PA70081.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
HDMI is a registered trademark of HDMI Licensing, LLC.
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
Important Safety Information
Electric shock hazard:
Contact with live circuits could result in
severe injury or death.
Disconnect cord from electronic equipment before
testing with this tool.
Failure to observe this precaution may cause damage
to electronic equipment.
PA70081
HDMI
®
Cable Tester
Contrôleur
de câbles HDMI
®
Verificador
de cables HDMI
®
4455 Boeing Drive • Rockford, IL 61109-2988 • USA • 815-397-7070
An ISO 9001 Company • Greenlee Textron Inc. is a subsidiary of Textron Inc.
USA
Tel: 800-435-0786
Fax: 800-451-2632
Canada
Tel: 800-435-0786
Fax: 800-524-2853
International
Tel: +1-815-397-7070
Fax: +1-815-397-9247
www.greenlee.com
Features
• Test all signal pins of HDMI
®
cables
• LED indicator on both master unit and remote unit
• Automatic ON and easy to operate
LED
LED Name HDMI
®
Pin
Signal
1
Data Red
1
TMDS Data2+
2
TMDS Data2 Shield
3
TMDS Data2–
2
Data Green
4
TMDS Data1+
5
TMDS Data1 Shield
6
TMDS Data1–
3
Data Blue
7
TMDS Data0+
8
TMDS Data0 Shield
9
TMDS Data0–
4
Clock
10
TMDS Clock+
11
TMDS Clock Shield
12
TMDS Clock–
5
CEC
13
CEC
14
Reserved
(N.C. on device)
6
SCL
15
SCL
7
SDA
16
SDA
17
DDC/CEC Ground
8
+5 Volts
18
+5V
9
Hot Plug
19
Hot Plug Detect
Specifications
Port Type: HDMI (A)
Battery: 9 V
Operation
1. Install a 9 V battery into the master unit.
2. Connect one end of the HDMI
®
cable to the master
unit, and the other end to the remote unit.
Test Results
• If all nine LEDs light up, the cable is defined as pass.
Note: This tester is only suited for continuity tests. It
does not indicate intercross issues or response time
issues on cables or connections.
• If any LED does not light up, the cable is defined as
failed.
