AP25 Installation and Operating Guide
Page 112
AP25 Installation & Operating Guide
Document # 9301H79500 Ver. 1.00
5.3.2 Error Booting the AP25
If, during boot up, an object (such as your finger) is in contact with the touch screen, the
software will fail to load. The message below will appear, and continues to scroll past until
power is recycled at the power entry module (hard boot).
************************************************************
mount: mounting /dev/sda1 on /tmp/usb failed: No such device or address
mount: mounting /dev/sda on /tmp/usb failed: No such device or address
************************************************************
insert USB memory stick with AP25 image
************************************************************
To solve this problem, reboot the AP25, making sure nothing is in contact with the touch screen during
the boot-up process.
