manualshive.com logo in svg

Dataradio T-96SR, Installation Manual, Page: 26 / 69

Share
Download
Dataradio T-96SR Installation Manual Download Page 26

2-6

001-4006-101

Figure 2-5   Field Programming Software Startup Screen

2.5 T-96SR FIELD PROGRAMMING SOFTWARE

2.5.1 Introduction

The T-96SR Field Programming Software provides programming and diagnostics for the Dataradio T-96SR 
wireless modem. The Field Programming Software allows the user to edit and program user programmable 
settings, interactively tune modem and RF parameters, and monitor diagnostic data from the T-96SR. See 
Figure 2-6 for the T-96SR Field Programming Software startup screen.

This manual assumes the Field Programming Software has been installed on the user’s PC with at least one 
operational serial COM Port available. 

2.5.2 COM Port Settings

T-96SR programming is done through the PC’s Primary COM Port. Primary and secondary COM ports are 
configured with the Field Programming Software. The programming cable (included in the Programming 
Kit - DRL part number 250-4006-001) is connected from the Setup Port on the T-96SR to the PC’s COM 
port configured as the Primary Port. The Port Settings screen of the Field Programming Software is 
accessed via the Utilities pull-down menu (see Figure 2-7). The Port Settings screens are used to configure 
the PC’s serial COM Ports. COM Port parameters are defined in 2.5.2.1. COM Port assignments are 
displayed in the bottom status bar of the T-96SR Field Programming Software screen.

Summary of Contents for T-96SR






































































Reviews:

No comments