120 20131-301
Gemini G3 - User Manual
66
The function and syntax of the Windows ROUTE command is similar to the UNIX or Linux
route command. Use the command to manually configure the routes in the routing table.
Available for MS-Windows 9x, ME, NT, 2000, and XP.
EXAMPLE
route ?
displays help
route print
displays the routing table
5.4.3 Statistics Information
•
NETSTAT (WINS & UNIX)
The netstat command symbolically displays the contents of various network-related data
structures, i.e. IP, TCP UDP …
Available for MS-Windows 9x, ME, NT, 2000, and XP.
EXAMPLE
netstat ?
displays help
netstat -a
display TCP and UDP connections and listening ports information
For further information on TCP/IP troubleshooting, please visit:
http://www.windowsitlibrary.com/Content/466/14/1.html
5.5 Firmware Upgrading
The GeminiG3 radiomodem firmware is field-upgradable using the unit’s Ethernet port. The process in-
volves connecting to the IP address of the mobile from a host PC and transferring the firmware files via
an FTP program.
5.5.1 Procedure
1.
Using a file decompression program, such as WinZIP™ or WinXP’s right-click & select the “Expand
to…” (or “Extract to…”) option, expand the contents of the firmware upgrade package to a directory
of your choice on the host PC.
Warning:
Be aware that base and mobile’s firmware archives are often distributed at the same time. Files
intended for the GeminiG3 radiomodem are labeled in the form
GeminiG3_edba_Vx.x_Rx.xx.zip
. Be careful not to transfer firmware into the wrong
unit!
2.
Using an FTP program of your choice, establish a connection to the mobile IP address. Please refer to
paragraph 4.7.5.1 for “Username” and “Password” usage.
3.
Transfer all the files in the upgrade package. Occasionally, long pauses, on the order of 30 to 45 sec-
onds, are possible when storing the file in the unit’s flash file system.
4.
Once the file transfer is complete, cycle the mobile power and allow the unit to boot. The unit should
return to the state that it was in when the update was started.
Note:
After resetting, the PWR LED remaining lit steady amber or red indicates the FTP transfer was
not successful or that the firmware is corrupt. Please contact Dataradio system engineering for as-
sistance.