120 20131-301
Gemini G3 - User Manual
29
4.7.3.4
Setup (Advanced)
►
Roaming Setup
Figure 20 - Roaming Setup
Item
Description
…roam across…cycles
When a base becomes congested and indicates that some mobiles should try to
roam to another base, this value spreads the activity so that mobiles do not roam at
the same time. Set this value large (in the hundreds) for systems with many active
mobiles
…RSSI is below…dBm
Mobile will roam if the average signal strength of all synchronization packets re-
served in the last 20 seconds is below this value
4.7.3.5
Setup (Advanced)
►
IP Services
Figure 21 - Advanced IP Configuration – IP Services Setup
Item
Description
Server
DHCP Server Disabled, Enabled (Default). The Dynamic Host Configuration Pro-
tocol provides a framework for passing configuration information
E.g.: IP address to Hosts (i.e. PC/RTU) on a TCP/IP network.
Gateway
Gateway address handed out by the DHCP Server to the DHCP Client. The default
value is set to the IP address of the Ethernet interface. If the gateway is set to
0.0.0.0, no gateway address will be handed out by the DHCP Server.