120 20131-301
Gemini G3 - User Manual
26
4.7.3.2
Setup (Advanced)
►
RF (IP)
At the time of manufacture, each Paragon3 base station and Gemini G3 radiomodem is provided with
a unique MAC address for its Ethernet and RF interfaces. These addresses cannot be changed. The
RF interface is also provided with a unique Factory RF IP address. If this IP address conflicts with
any existing IP network, it can be overridden.
Figure 18 - Advanced IP Configuration - RF (IP)
Item
Description
RF MAC
RF Interface MAC address in HEX format
(factory-set)
.
Displays factory-assigned address: nnn.nnn.nnn.nnn “Factory”
RF IP Address
Entering 0.0.0.0 sets the RF IP Address to the factory default and highlights the
“Factory” name (active address)
Entering nnn.nnn.nnn.nnn (RF IP Address of your choice) overrides the factory
default and highlights the “Override” name (active address)
RF Net Mask
Set to valid common IP netmask for all units within a GeminiG3 network
RF MTU
RF Interface MTU - Default 1500. – For optimal performance, set to 1500.
Flexibility of using other values may be useful in testing or for particular operational
conditions. If a lower value is used, Dataradio suggests that the value present in
Setup Advanced
Î
LAN (IP) in the MTU dialog box be also changed to match the RF
MTU value.
Range is 576 to 1500.