120 20131-301
GeminiG3 - User Manual
10
•
In installations equipped with a “ChargeGuard”, connect to the controlled-side of the Char-
geGuard (remembering that the DC Power lead must NOT be switched).
10.
Make appropriate connections.
Cautions:
Where scraping to bare metal was required, and at the battery posts where wire ends and
lugs may be exposed, apply anti-corrosion compound.
Insert the fuse only when installation is complete and ready to test
.
11.
At the GeminiG3 radiomodem’s position, neatly coil cable slack and attach securely.
2.5 Antenna
The main transmitter antenna must be vehicle-mounted to provide a separation distance of 50 cm or
more from all persons and the
antenna gain
must not exceed 5dBi (with a 1.6dB cable loss).
2.5.1 Recommended tools and supplies
•
Circle cutter, hole saw or socket punch for antenna
•
Appropriate crimping tool for type of connection present on the radiomodem unit