120 20131-301
Gemini G3 - User Manual
67
5.
Verify the integrity of the newly transferred files.
a)
Connect to the mobile’s IP address using an Internet browser such as IE (5.0 or later) or Mozilla.
b)
Enter the
user name
and
password
(in the usual manner)
and allow the
Welcome
page to
load.
c)
In the left pane, click on
Unit Status
. The
Unit Identification and Status
pane should display
the newly upgraded firmware in its
Banner
(should correspond to the upgrade package version)
and the
H/W Status
should also show
Ok
.
d)
In the left pane, click on
Maintenance
, then on
Package Control
. Wait a few moments for the
results to display. Figure 52 shows a “Pass” result indication.
Figure 56 - Sample FTP program
5.5.1.1
File Integrity Failure
If the message in the result screen points out that file(s) failed the integrity check, retry the FTP transfer
for the failed files(s) again.
If the problem persists, please have the
Package Control
result screen indications handy and contact Da-
taradio system engineering for assistance.