120 20131-301
Gemini G3 - User Manual
56
4.7.7.2
Maintenance
►
Config Control
Important note:
Record all original GeminiG3 radiomodem factory settings for possible future use.
Figure 51 - Maintenance - Unit Configuration Control (Initial screen)
Item
Description
Active Configuration Description
Active Configuration Description Field – available by selecting “Checkpoint
User Configuration” option button in the “User Configuration Settings “
portion of this window below.
Checkpoint User Configuration (Save User Configuration) – saves a set of
the current user configuration settings in the GeminiG3 unit.
Click on the “Checkpoint User Configuration” option button to activate the
“Active Configuration Description” field. Enter a descriptive title of up to 40
characters to help identify the configuration settings to be saved.
Click on
“Proceed” to save the settings to the unit. The new configuration set over-
writes the factory (or previously user saved) configuration settings.
User Configuration Settings
Restore User Configuration Checkpoint (Load User Configuration) – the
option button is available if “User Configuration Settings” have been previ-
ously saved. To restore to user configuration, click the “Restore User Con-
figuration” option button. Check the title of the settings about to be restored
in the “Active Configuration Description” field and click on “Proceed” to
restore the settings to the unit.
Firmware Upgrade Settings
Merge settings bundled in upgrade package with current configuration-
merges upgraded settings with the current configuration.
Note: the "firmware update" process will end up replacing an existing con-
figuration file with the one that came bundled with the firmware upgrade
package.
Factory Settings
Restore Factory Settings: restores all settings to default factory configura-
tion.
Upon performing the firmware upgrade, should you decide to restore to
factory settings instead of to “merge with bundled settings”, simply select
the “Restore Factory Settings” option button right after performing the
firmware upgrade and click on “Proceed”.
Important note:
Activating “ Restore Factory Settings” will reset the IP address of the unit.
Have your record of all the original GeminiG3 unit factory settings handy
before proceeding with restoring to factory settings.