120 20131-301
Gemini G3 - User Manual
16
4. Operation & Configuration
Instructions and examples given in this manual are based on E-DBA operating software version at the
time of writing this document and may not apply to earlier or later software versions. Screen captures
used throughout this document may vary from actual screens.
4.1 Browser-Based Interface
A built-in web server makes configuration and status monitoring possible from any browser-equipped
computer, either locally or remotely. Status, configuration, and online help are available without re-
quiring special client software. Setup is password-protected to avoid tampering or unauthorized
changes.
Both the configuration parameters and operating firmware can be updated remotely, even over the RF
network itself, using the standard File Transfer Protocol (FTP).
Figure 7 - Web Interface
4.1.1 Interface Setup and Status
The GeminiG3 radiomodem user interface is used to configure and view your network settings.
Figure 7 shows the welcome screen of the Web Interface. The screen is subdivided in two frames: the
frame on the left allows the user to navigate through the menus, while the main frame on the right
displays the selected page. The menu system is two-leveled; some of the top-level menus expand to
offer submenus. The
Site Map
link can be found right below the menus on the navigator pane. Help is
available for each page displayed in the main frame. It can be accessed at all times by clicking the
Help
icon. The remaining buttons on the bottom of the Navigator frame are used to save your con-
figurations and reset the unit.
Navigator
Frame
Main
Frame