DI-1110 Hardware Manual
Controls, Indicators, and Connections
16
Connect any TTL pulse stream (25 VDC max) to the D3 Count channel on the DI-1110.
General Purpose Digital Inputs
Enable Channel 9 for general-purpose digital input functions. Click on
Edit
>
Channels
in the W
IN
D
AQ
Acquisition
menu to open the Channel Selection grid. Channel 9 is the designated Digital Input channel. Click on the Channel 9
channel box to enable/disable the digital inputs. The Channel 9 channel box will display an “I” when enabled.
Channel 9 records and displays all the digital inputs, even the state of the Rate and Count inputs if those channels are
enabled. With Channel 9 selected in the display window click
Scaling
>
Digital Plot
to show a digital display and
make the data more meaningful on screen.
Signal -
www.dataq.com
+
-
+
-
+
-
+
-
D5
D4
D6
GnD
+5V
Power
Remote
Active
-
+
Ch1
-
+
Ch2
-
+
Ch3
-
+
Ch4
Model DI-1110
Analog Inputs (±10 VFS, ±100 V max)
+
-
+
-
+
-
+
-
Digital Ports (25 V @ 100mA max.)
Data Acquisition Starter Kit
Download software
at run.dataq.com
Rate/D2
Cnt/D3
Rcrd/D1
Evnt/D0
-
+
Ch5
-
+
Ch6
-
+
Ch4
-
+
Ch7
-
+
Ch8
