DI-1110 Hardware Manual
Controls, Indicators, and Connections
7
4. Controls, Indicators, and
Connections
Please note: The SD card slot is not used in the DI-1110. Allowing foreign materials to enter the device through the
SD card slot may result in damage to the instrument.
Mini-B USB Connection
Use the supplied USB cable to connect and power the instrument through your computer’s USB port.
Screw Terminals
All input signal connections are made to the 16-port screw terminals. Each terminal is labeled on the instrument case.
CAUTION
Do not touch the input terminals after signal cables are connected to the system under test,
since it will cause an electric shock.
To avoid ESD damage in handling the device, take the following precautions:
Ground yourself with a grounding strap or by touching a grounded object before and during
your handling of the instrument.
Analog In
Channels 1-8
Digital Ports
Power, Active, and
Remote LEDs
Event Marker
Push Button
Mini-B
USB Connection
SD Card Slot
(not used in DI-1110)
Bulkhead Mounting
Ear
Bulkhead Mounting Ear
+5V
Excitation Ground
www.dataq.com
+
-
+
-
+
-
+
-
D5
D4
D6
GnD
+5V
Power
Remote
Active
-
+
Ch1
-
+
Ch2
-
+
Ch3
-
+
Ch4
Model DI-1110
Analog Inputs (±10 VFS, ±100 V max)
+
-
+
-
+
-
+
-
Digital Ports (25 V @ 100mA max.)
Data Acquisition Starter Kit
Download software
at run.dataq.com
Rate/D2
Cnt/D3
Rcrd/D1
Evnt/D0
-
+
Ch5
-
+
Ch6
-
+
Ch4
-
+
Ch7
-
+
Ch8
!
!
