DI-1110 Hardware Manual
Installation
6
6. Software installation is complete - you will now see a “Successful Installation” box - click
OK
to exit W
IN
D
AQ
Installation.
You can now plug the device(s) into your PC. Click on the “WinDaq Dashboard” shortcut to access W
IN
D
AQ
soft-
ware.
Connect the Instrument to Your Computer
DI-1110 instruments can be connected to your computer’s USB port using the provided USB cable. No external
power is required. Connect one end of the communications cable to the instrument port and the other to your PC’s
port.
Note: Use a powered USB hub or a USB port on your PC. Non-powered USB hubs may not have sufficient power to
run the instrument.
