iboot-poe-p_v190422w
iBoot-PoE-P
Page 17
Time: Set the initial time for the event. The
format for the time is hh:mm with hours in
24 hour format.
Repeat: Set the repeat multiplier, if desired.
Set the number from 0 to 999 and either
Days, Hours, or Minutes. To have the
schedule repeat every two days, set this
number to 2.
Action: Set the event Action; On, Off or
Cycle.
Enable: When this box is checked, the
event will occur at the programmed time.
When it is unchecked, the event will not
occur, but the next calculated event time will
be displayed.
Clear: Delete the scheduled event.
Click Save to save the current settings. Click Reset to delete any unwanted changes.
5.7. Password Settings
The iBoot-PoE-P supports three modes of user and
password operation.
Login Required: This mode supports both User and
Admin users. Each user has a settable password.
Auto Login: This mode does not require a
username of password for the User level operation.
No login challenge will be required for any mode of
operation, until any setup function is requested.
The Admin username and password is required for
any admin functions.
User Disabled: There is no User account. The Admin username and password will be required for
operation and setup functions across all modes of operation. This is the factory default mode.
Two passwords are used by iBoot-PoE-P. In the Login Required mode, The User Password allows access
to the control of iBoot, but not to the Setup functions. Clicking on the Setup button allows the Administrator
to log in. Passwords can be up to 20 characters long and are case sensitive.
Enter the current password then the new password twice to confirm.
Default Credentials
Role
Username (fixed)
Password (user set)
Administrator
admin
admin
User
user
user
