iboot-poe-p_v190422w
iBoot-PoE-P
Page 14
5.3.
Advanced Network Settings
HTTP Port: This setting is used to allow
access to iBoot-PoE-P on a port other
than the Web standard Port 80. If the
port is changed, you will need to identify
the port number when you enter iBoot-
PoE-P 's IP address into your browser. If
the new port is 8080 then use the
address
http://192.168.1.254:8080.
Linkback URL: This setting allows
control of the hotlink displayed on the
Goodbye page. It allows use of the
public IP address or DNS name instead
of the internal IP Address of the iBoot-
PoE-P, which is the default setting. If
this setting is left blank, the hotlink will
be the IP Address of the unit. Enter up to
128 characters.
Telnet Port: This setting is used to allow access to the iBoot-PoE-P via telnet by ports other than the
standard for telnet 23.
DxP Port: This setting is used to allow access to the iBoot-PoE-P via Dataprobe Exchange Protocol (DxP)
via ports other than standard 9100.
Enable Cloud Services: This setting enables the iBoot-PoE-P for iBoot Cloud Services (iBCS). iBCS
allows the iBoot-PoE-P
to be monitored and controlled from a web portal from any browser. It allows
multiple iBoots to be managed from a single portal. For a complete description of iBCS and setup
instructions, see Section 6.
Note:
Some of the TCP/IP Settings require a reboot of the iBoot-PoE-P, after clicking Save. A
Reboot button will appear at the bottom of the page when it is necessary. The new settings will
not take effect until the unit is rebooted. Reboot will not affect the power position of the
iBoot-PoE-P. Upon Clicking Reboot, the Goodbye page is displayed with a link to re-login.
5.4.
Time Setup
The Advanced Network Setup page also allows setup of the Time server, required for Scheduling and
Logging functions.
Enable: Enable or Disable the use of the Time Server with this checkbox
Time Server: Enter the Time Server. The default is
time.nist.gov
Time Zone: Enter the Time Zone (-12 to +12) relative to GMT
DST Enable: Enable or Disable the use of Daylight Savings Time with this checkbox
DST Start / Stop: Enter the start and stop parameters of Daylight Savings Time here.
