iboot-dc_v181024e
iBoot-DC
Page 8
5. Web Browser Operation
5.1.
Password Protection
iBoot-DC uses two username/password credential sets, one for power
control only (User) and one that also provides access to the setup
functions (Admin). This configuration can be changed to require
Administrator credentials at all times or allow unsecured User level
control. See section 6.8.
Default Credentials:
Role
Username (fixed)
Password (settable)
Administrator
admin
admin
User
user
user
Open your browser and enter the IP address of iBoot-DC into the address bar. If you have changed the IP
address by any of the methods described or used DHCP, enter that address, otherwise, use the default IP
address 192.168.1.254
Enter the username and password when prompted. When the proper username/password is received the
Control and Status Page is displayed.
iBoot-DC uses an inactivity timer for security. This timeout is user selectable from 0 to 99 minutes.
Setting to zero disables the timeout feature. When there is no activity for the set time in minutes, the user
is automatically logged out and the username and password will need to be entered again for access. This
is to prevent accidental lockout by leaving the user logged in.
As the iBoot-DC allows only one Web user logged in at any time, use caution when disabling the
timeout feature, as it is possible to lock out other users by forgetting to logout. Closing the
browser will not log the user out and will lock out web access. If you do become locked out,
access the iBoot-DC via Telnet and reboot the unit, or press the reset button (see Section 11).
5.2. Mobile Browser Support
iBoot uses adaptive web pages to accommodate desktops, tablets
and smartphones. No additional apps are needed to access the
complete features.
Enter Username and Password
