Extended System-Level Command Functions
78
Class Series 2 Programmer’s Manual
General WIFI Configuration Parameters – Identifier ‘G’
The ‘G’ WIFI sub-group contains the configuration parameters that are generally common to ALL WIFI
radio modules used by Datamax-O’Neil. These configuration parameters are universally standard within
the WIFI realm and are interpreted commonly by the various WIFI radio modules. The ‘Item-Value’ pairs
within the ‘G’ sub-group of the ‘WIFI’ sub-group are defined by the following table:
Item
Number
Name Available
to User
(Y/N)
Value Type
Description
1
DHCP Enable
Y
Boolean
Indicates if the DHCP Protocol is to
be used to automatically obtain all
required network addresses.
Formally known as IP Discovery.
2 Static
Printer
IP
Address
Y
String
Static IP Address for the Printer in
dotted decimal notation.
3 Static
Printer
Subnet Mask
Y String
Static
Subnet
Mask for the Printer in
dotted decimal notation.
4 Static
Printer
Default Gateway or
Router
Y
String
Static Default Gateway (Router) IP
Address in dotted decimal notation.
5
MTU
Y
Decimal
Defines the Maximum Transmission
Unit size for the wired interface.
Defaults to the DEFAULT MTU from
the ‘G’ sub-group. Cannot exceed
the maximum ethernet packet size!!!
6
Ad-Hoc Channel
Y
Decimal
WIFI Channel Number used when
operating in Peer-Peer (Ad-Hoc)
mode.
7 Region
Code
Y
String Two
(2) character zero terminate
Region Code string, such as “US”.
8
WEP Key Used
Y
Decimal
A decimal number from 1 to 4 that
designates the WEP key used.
9
WEP Key 1
Y
String
10 or 26 digit WEP Key 1
10
WEP Key 2
Y
String
10 or 26 digit WEP Key 2
11
WEP Key 3
Y
String
10 or 26 digit WEP Key 3
12
WEP Key 4
Y
String
10 or 26 digit WEP Key 4
13 Pre-Shared
Key
or
PSK
Y
String
8 to 64 character Pre-Shared Key
used by WPA-PSK or WPA2-PSK
14
LEAP Used ID
Y
String
User ID String for LEAP (Cisco) EAP
Protocol.
15 LEAP
Password
Y
String
Password String for LEAP (Cisco) EAP
Protocol.
16
EAP User ID
Y
String
User ID String for other EAP
Protocols.
17
EAP Password
Y
String
Password String for other EAP
Protocols
18
EAP Realm
Y
String
Realm String for EAP Protocols that
utilize a Realm.
19 SSID
Y
String
String
that
represents the SSID if in
Infrastructure mode.
20 WIFI
Type
Y
Decimal WIFI Module type (DPAC1=1,
SILEX=2, DPAC2=3)
Summary of Contents for MP Compact4 Mark II
