Datamax-ONeil RL3, User Manual

Page: 20 / 71

www.datamax-oneil.com 13
The Front Panel is an event-driven interface composed of a graphic
display and four (4) buttons. In addition to providing current printer
information, the mode-dependent panel allows the items in the main
display area and the button functions to change as operational events
require.

The RL Series printer displays will enter sleep mode after one (1) minute of inactivity; press any
button to wake.
RL Series printers will turn off after 120 minutes of inactivity. This “shutdown” period can be
adjusted or disabled using the NETira ™ CT configuration program (Ver. 35 or greater) and by
modifying the System Settings/System Power Down setting. See Section 3.3 for more information on
NETira ™ CT. When the printer is charging it will not “auto shutoff.”
3.1.1 LCD Icons
Icon
Function
90%
Battery Charge Level. The number of bars and the % will change according to
remaining battery charge. During charging, the battery level is continuously
progressing to show charging, unless at 100%
Wireless LAN Signal Strength.
The DC power supply is connected and the battery is charging.
IP: 192.168.0.1
IP address currently assigned to the printer (if equipped). If an IP is not assigned,
it will display as 0.0.0.0. Bluetooth ® models will display the MAC address.
3.1.2 Audible Alerts
Alert Event
One (1) beep AC power supply disconnected
Two (2) beeps AC power supply connected
Five (5) beeps Opened printer cover or Paper-out condition
Constant beep (10 seconds in duration) Failed download (via RS-232)
Short interval beep (for length of download) Downloading data (via Wireless LAN)