Datalogic UniQ 1150-1X41, Product Reference Manual

Page: 27 / 128

MARKING AREA SPECIFICATION
PRODUCT REFERENCE GUIDE
19
MARKING AREA SPECIFICATION
Datalogic provides a wide range of laser marker models with different F-Theta scan
lenses configurations.
These configurations are provided to best match customer needs regarding marking
field size, working distance and power density.
NOTE: Contact Datalogic if other configurations are necessary.
NOTE: Definition of Marking Area: square marking field measured on black
anodized aluminum plate.
CAUTION: This product was designed to use only certain configurations of
F-Theta scan lens and marking field. If your needs are not satisfied by the
currently available F-Theta scan lens configurations please contact Data-
logic for a solution. The use of other F-Theta scan lenses or operation out-
side the specified marking field for a certain F-Theta scan lens
configuration can lead to damage of the F-Theta scan lens, scan head or
laser source. Such damage is not covered by warranty!
CAUTION: For each F-Theta scan lens configuration Datalogic provides a
specific adapter. This adapter ensures that residual back reflections
caused by the F-Theta scan lens do not damage the scanning head optics.
The removal of such adapter or its incorrect use (for example incomplete
threading, use of another F-Theta scan lens adapter, etc.) can lead to dam-
age of the F-Theta scan lens, scan head or laser source. Such damage is
not covered by warranty!