Datalogic Touch 90 pro, Product Reference Manual

Page: 240 / 332

Enter/Exit Programming Mode Codablock F
230 Touch TD1100
Codablock F Set Length 1
This feature specifies one of the bar code lengths for Codablock F Length Control . Length 1 is
the minimum label length if in Variable Length Mode, or the first fixed length if in Fixed
Length Mode. Length includes the bar code’s data characters only.
The length can be set from 003 to 255 characters. See "Set Length 1" on page 278 for more
detailed programming instructions.
$CCFL1
Select Codablock F Length 1 Setting
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
Appendix D, Keypad
repre-
senting your desired character(s). End by scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
ning.
~
CANCEL
DEFAULT
003 = Length 1 is 3 Characters