manualshive.com logo in svg

Datalogic Skorpio X4, User Manual

Share
Download
Datalogic Skorpio X4 User Manual Download Page 56

Getting Started

48

Skorpio™ X4

LED Indicators

The LEDs illuminate to indicate various functions or errors on the
reader. The following tables list these indications. 

LED

Status

Description

Charging LED
(left side)

Red Constant

Light is solid red while charging.

Green Costant

Light is solid green once the charging 
process has completed (full charge).

Red Blink

Blinking red indicates a charge fault.

Amber Blink

Light is blinking amber when the device 
raises a notification to the user.

Keyboard LED
(center)

Off

Keyboard in primary.

Yellow Constant

Yellow alternate key mode.

Blue Constant

Blue alternate key mode.

Pink

CapsLock enabled.

Good Read LED

*

(right side)

* The Good Read LED has also a "Suspend LED" feature. The decode LED will glow red when 

the device begins to suspend, and will turn off when the suspend completes 
successfully.

Red

Light is red from the time the user 
presses the scan key (or trigger) until 
the barcode is decoded (1D models), 
until the scanner times out (2D imager 
models).

Green

Light changes to green when a good 
decode is completed.

Summary of Contents for Skorpio X4



































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands