manualshive.com logo in svg

Datalogic Skorpio X3, User Manual

Share
Download
Datalogic Skorpio X3 User Manual Download Page 123

TECHNICAL FEATURES 

 

115 

 

5 

5  TECHNICAL FEATURES 

 
 

5.1  TECHNICAL DATA 

 

PHYSICAL CHARACTERISTICS 

DIMENSIONS (LxWxH) 

Handheld: 193 x 76 x 42 mm, 61 x 35 at 
keyboard / 7.6 x 3 x 1.6 in, 2.4 x 1.4 in 
Pistol Grip: 193 x 76 x 156 mm / 7.6 x 3 x 6.2 in 

WEIGHT 

Handheld: 392 g / 13.8 oz., including standard 
battery 
Pistol Grip: 482 g / 17 oz., including standard 
battery 

AUDIO 

Headset (not provided; it requires a HandyLink 
adapter) 
Main (rear) speaker 
Receiver (front) Speaker 

LEDS 

Three LEDs Decoding Status/ Keyboard Status/ 
Charging Status 

DISPLAY 

Reflective TFT daylight readable colour display, 
320 x 240 pixels (3.2” diagonal), 65K colours, 
backlit, touch screen 

KEYBOARD 

numeric 28keys, full-alphanumeric 50keys, 
alpha-numeric 38keys; Dimmable backlight 

OPERATING TEMPERATURE* 

-10º +50ºC (14º to 122ºF) 

STORAGE TEMPERATURE 

-20º +70ºC (-4º to 158ºF) 

HUMIDITY** 

95% non condensing for temperatures < 40 °C 

DROP RESISTANCE*** 

Withstands drops from 1.5 m (5 ft) onto concrete 

ENVIROMENTAL SEALING 

IP64 standard for water and dust resistance 

ESD PROTECTION 

4 KV contact discharge, 8 KV air discharge 

*  Skorpio X3 (including spare battery) should be charged at an ambient temperature between 
 

0 - 35º C to achieve the maximum charging rate. Never charge the main device or spare 

 

batteries in a closed space where excessive heat can build up  

 

Close to the limits of the working temperature, some display and/or battery performance 

 

degradation may occur. 

**  Multiple rapid humidity and/or temperature variations may cause condensing. 
***  Multiple drops can permanently damage the device. 

Summary of Contents for Skorpio X3
































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands