LED and Beeper Indications
Quick Reference Guide
39
LED and Beeper Indications
The reader’s beeper sounds and its LED illuminates to
indicate various functions or errors on the reader. An
optional “Green Spot” also performs useful functions. The
following tables list these indications. One exception to
the behaviors listed in the tables is that the reader’s func-
tions are programmable, and so may or may not be turned
on. For example, certain indications such as the power-up
beep can be disabled using programming bar code labels.
Indication
Description
LED
Beeper
Power-up Beep
The reader is in the
process of power-
ing-up.
Fast RGB loop
for Top Led
Reader beeps
four times at
highest fre-
quency and vol-
ume upon
power-up.
Good Read
Beep
A label has been
successfully
scanned by the
reader.
LED behavior for
this indication is
configurable via
the feature
“Good Read:
When to Indi-
cate” (see the
PRG for infor-
mation.)
The reader will
beep once at
current fre-
quency, vol-
ume, mono/bi-
tonal setting
and duration
upon a success-
ful label scan.
ROM Failure
There is an error in
the reader's soft-
ware/program-
ming
Top Led Flashes
Reader sounds
one error beep
at highest vol-
ume.
Limited Scan-
ning Label Read
Indicates that a
Host connection is
not established
when the USB
interface is
enabled.
N/A
Reader 'chirps'
six times at the
highest fre-
quency and cur-
rent volume.
Reader Active
Mode
The reader is
active and ready to
scan.
Side LED s lit
steadily
a
N/A
Reader
Disabled
The reader has
been disabled by
the Host.
Top LED blinks
continuously
N/A
