Selecting the Base Interface Type
24
RIDA™ DBT6400
Selecting the Base Interface Type
Upon completing the physical connection between the
base and its host, proceed directly to Interface Selection to
select the kind of USB interface type the base is connected
to; scan the appropriate bar code for your system’s inter-
face type.
The base will support the following USB host interfaces:
•
USB COM to simulate RS-232 standard interface
•
USB-OEM (can be used for OPOS/UPOS/JavaPOS)
•
USB Keyboard
•
USB Composite (KE COM)
For defaults and additional information associated with
each interface, proceed to the corresponding chapter in
the Product Reference Guide.
Configuring the Interface
Scan the programming bar code which selects the appro-
priate interface type for the system the reader will be con-
nected to.
NOTE
Unlike some other programming features and
options, interface selections require that you
scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code prior to scan-
ning an interface selection bar code.
