Datalogic Rhino II/ SH Blackline, User Manual

Page: 36 / 52

32
RHINO™ II/ SH BLACKLINE
COMMUNICATIONS
There is more than one way to connect the VMC to a host PC running Windows. Each
requires specific connections in order to function properly.
SETTING UP ETHERNET COMMUNICATIONS
Ethernet communications usually do not require special configuration. The VMC default
settings are configured to use DHCP to automatically get an IP address from a DHCP
server. To change these settings select Start -> Settings -> Network & Internet -> Ether -
net.
SETTING UP 802.11 RADIO COMMUNICATIONS
The Rhino II/SH Blackline has an internal 802.11 a/b/g radio. In Windows 10 IoT the
radio is managed by the standard built in Microsoft Wireless Manager. To change set -
tings go to Start -> Settings -> Network & Internet -> Wi-Fi
SETTING UP BLUETOOTH RADIO COMMUNICATIONS
Running Windows 10 IoT, the Bluetooth radio is attached in the connection compart -
ment to a USB port.
It is managed by the standard built in Microsoft Bluetooth manager.