Datalogic Rhino II A6, User Manual

Page: 40 / 78

Communications
34 Rhino™ II
Check Ethernet Communications
1. Open the Ethernet application.
2. Tap Check Ethernet .
Connection information will be displayed on the top right corner of
the screen.
Setting Up 802.11 Radio Communications
The Rhino II has an internal 802.11 a/b/g/n 2x2 MIMO radio module.
1. Open Settings .
2. Tap Wi-Fi .
3. Turn on the Wi-Fi toggle.
4. Tap a listed network. If it needs a password, you'll see the Lock
symbol. After you connect:
• Connected is showed under the network name.
• The network is Saved . When your device is near and Wi-Fi is
on, your device automatically connects.
For advanced Wi-Fi settings (Proxy, Wi-Fi Direct, Static IP,
certificates, etc.) see the Google Android Support pages.