Linking the Reader
Quick Reference Guide
11
then scan the
Unlink
bar code before re-linking to the new
base.
Linking to a Bluetooth Adapter in
Serial Port Profile Mode
1.
Install any drivers provided with the Bluetooth
adapter.
2.
Scan the
Enable RF Link to Server
label below to
make the scanner visible to the host computer.
3.
Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
4.
Use an RS-232 terminal program to see incom-
ing data on the port designated by the com-
puter's Bluetooth manager.
Linking to a Bluetooth Adapter in HID mode
1.
Install any drivers provided with the Bluetooth
adapter.
2.
Scan the
Link to PC in HID
label below..
3.
Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
Unlink
Enable RF Link to Server
