Datalogic QuickScan Lite 21 Series, Product Reference Manual

Page: 81 / 324

Label ID
Product Reference Guide 71
ENTER/EXIT PROGRAMMING MODE
Label ID: Set Individually Per Symbology
This feature configures a Label ID individually for a single symbology.
Label ID Control
This option controls whether a Label ID is disabled, or sent as a prefix or suffix for a given sym-
bology type.
NOTE
This setting requires the scanning of bar codes from multiple sec-
tions. See
Label ID: Set Individually Per Symbology on
page 264
for more detailed programming instructions.
$CIDCO00

Label ID Transmission = Disable
$CIDCO01

Label ID Transmission = Enable as Prefix
$CIDCO02

Label ID Transmission = Enable as Suffix
~
CANCEL
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
DEFAULT