manualshive.com logo in svg

Datalogic QuickScan Lite 21 Series, Product Reference Manual

Share
Download
Datalogic QuickScan Lite 21 Series Product Reference Manual Download Page 13

Technical Support

Product Reference Guide

        

                   

3

Technical Support

Datalogic Website Support

The Datalogic website (

www.scanning.datalogic.com

) is the complete source for technical 

support and information for Datalogic products. The site offers product support, prod-
uct registration, warranty information, product manuals, product tech notes, software 
updates, demos, and instructions for returning products for repair. 

Reseller Technical Support

An excellent source for technical assistance and information is an authorized Datalogic 
reseller. A reseller is acquainted with specific types of businesses, application software, 
and computer systems and can provide individualized assistance. 

Telephone Technical Support

If you do not have internet or email access, you may contact Datalogic technical support 
at (541) 349-8283 or check the back cover of your manual for more contact information.

Summary of Contents for QuickScan Lite 21 Series





































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands